wio-sx1262

XIAO nRF52840 & Wio SX1262 Kit

:::warning[Note]

The Wio-SX1262 module shipped with this kit does not have the same pin configuration as the one shipped with the XIAO ESP32S3 kit. If you want to use a Wio-SX1262 module from a different Seeed kit with a XIAO nRF52840, you may need to flash custom firmware with the correct pin definitions.

:::

A thumb-sized LoRa dev kit based on the nRF52840 MCU, supporting BLE, and LoRa. It includes a built-in power management chip and can be extended via I²C, UART, and other GPIO interfaces, with compatibility for Arduino development.

Specifications

• MCU
• XIAO nRF52840 (Bluetooth)
• LoRa Transceiver
• Semtech SX1262
• Frequency options
• 862-930 MHz
• Connectors
• USB-C
• Antenna
  • U.FL/IPEX antenna connector for LoRa

Features

• Thumb-sized Compact Design: 21 x 18mm, adopting the classic form factor of XIAO.
• L76K GNSS Module available: A compatible Seeed L76K GNSS Module is available with the same form factor as the XIAO nRF52840 & Wio-SX1262 Kit.

Resources

• User Guide
• Purchase Links:
• International
  • Seeed Studio Online Store

Pin Map