lilygo-lora32-v2

Created by tropho/TonyG

TTGO LoRa32 v2.1.1.6 Case (will also fit the SX1280/v2.1.1.8 variety)

Download from Printables or purchase from the creator's Etsy Store.

Required Hardware

• (x4) M3x16mm socket-head cap screws
• (x4) M3 Nuts
• (x2) M2 Screws (to secure TTGO LoRa32 board to frame)
• (x1) LiPo battery pack (1,000mAh)
• (x1) Momentary micro push button for PRG (6x6x5mm)