wio-sx1262

XIAO ESP32-S3 & Wio SX1262 Kit

:::warning[Note]

The Wio-SX1262 module shipped with this kit does not have the same pin configuration as the one shipped with the XIAO nRF52840 kit. If you want to use a Wio-SX1262 module from a different Seeed kit with a XIAO ESP32S3, you may need to flash custom firmware with the correct pin definitions.

:::

A compact LoRa development kit, combining WiFi, Bluetooth, and LoRa connectivity. It features an integrated power management chip and supports expansion via I²C, UART, and GPIO interfaces with compatibility for Arduino development.

Specifications

• MCU
• XIAO ESP32S3 (WiFi & Bluetooth)
• LoRa Transceiver
• Semtech SX1262
• Frequency options
• 862-930 MHz
• Connectors
• USB-C
• Antenna
  • Dedicated 2.4 GHz metal spring antenna for WiFi/Bluetooth
  • U.FL/IPEX antenna connector for LoRa

Features

• Thumb-sized Compact Design: 21 x 18mm, adopting the classic form factor of XIAO.
• Grove Connectors: 400+ Grove-compatible GPIOs for flexible expansion options.
• L76K GNSS Module available: A compatible Seeed L76K GNSS Module is available with the same form factor as the XIAO nRF52840 & Wio-SX1262 Kit.
• When using the Seeed L76K GNSS Module together with this kit, the L76K RST pin is shared with the Wio-SX1262 RST pin. In order to use these modules together, you must cut the pin so that is not connected to the L76K GNSS Module.

Resources

• User Guide

Pin Map